Lifetime Free Rupay Credit Card

Apply Now

Best Geyser would be one with best inner tank and heating element protection. But due to difficult bathroom construct and many other unusual reasons people prefer water heater geyser with free installation where all is on water geyser manufacturer.

So here we are listing a few water heater geyser brands which offer free installation.
Havells Water Geysers
Racold Water Geysers
Anchor By Panasonic Water Geysers
Jaquar Water Geysers
Faber Water Geysers
Vguard Water Geysers (selected models only)
Crompton Water Geysers (selected models only)

Installing a water geyser also known as a water heater in India follows a process listed below:

Here’s a general guide for installing a water geyser in India:
  1. Choose the Right Location:
    Decide on a suitable location for your water geyser. It should be a well-ventilated area with proper drainage and easy access for maintenance.
  2. Select the Type of Water Geyser:
    There are primarily two types of water geysers: storage (tank) water heaters and instant (tankless) water heaters. Choose the type that suits your needs and preferences.
  3. Gather Required Tools and Materials:
    Make sure you have all the necessary tools and materials, including the water geyser unit, appropriate piping and connectors, pipe insulation, Teflon tape, a wrench, pliers, a screwdriver, etc.
  4. Prepare the Plumbing:
  • Turn off the main water supply to the house.
  • Drain the water from the existing plumbing lines to avoid water spillage during installation.
  • If replacing an old geyser, disconnect and remove the old unit.

Install Piping:

  • Connect the cold water inlet pipe to the geyser’s cold water inlet valve using the appropriate connectors and Teflon tape to ensure a watertight seal.
  • Connect the hot water outlet pipe from the geyser’s outlet valve to the plumbing system.

Mounting the Geyser:

  • Mount the geyser on the wall using suitable brackets, ensuring it is stable and properly positioned.
  • Follow the manufacturer’s instructions for proper mounting and spacing requirements.

Electrical Connections:

  • For an electric water geyser, hire a licensed electrician to install the necessary electrical connections.
  • Connect the geyser to an appropriate power source with the correct voltage and wiring.
  • Follow all safety guidelines and regulations while handling electrical connections.

Water Inlet and Outlet Connections:

  • Double-check all water inlet and outlet connections for leaks and make sure they are properly tightened.


  • Insulate the hot water pipes to prevent heat loss and increase energy efficiency.


  • Turn on the main water supply.
  • Open the hot water tap to allow any air to escape from the system.
  • Turn on the geyser and let it heat the water to the desired temperature.
  • Check for any leaks or issues in the connections.
  1. Safety Measure:
    • For gas water geysers, ensure proper ventilation to prevent gas buildup and potential hazards.
  2. User Manual:
    • Familiarize yourself with the user manual provided by the manufacturer for maintenance and troubleshooting guidelines.

It’s important to note that installation procedures might slightly vary depending on the specific model and type of water geyser you’re installing. Always prioritize safety and proper installation practices.